Design Your Home or Business With That Perfect Door
Top Quality Materials in Every Door
816.918.2860    Residential - Commercial    816.918.2860
Aluminum Full View Model 8000
How to Measure Your Door - CLICK HERE



Construction

 

Standard Features

 

Door Sections
Door sections are 2" thick and consist of extruded aluminum rails and stiles assembled with 5/16" threaded rods and nuts. Glazing is sealed on all four sides and retained on all four sides with extruded aluminum snap-in beads. The end stiles have a visible width of 3 3/8". Center stiles have a visible width of 2 3/4". Top rail has a visible height of 2 7/8" or 4 1/4" depending on door size. Bottom rail has a visible height of 2 7/8", 4 1/4" or 7 1/4" depending on door size and weight. Combined meeting rails have a visible height of 2 1/2". Lower meeting rail has an integral reinforcing fin on doors over 12' 2" wide (Model 8100) or over 10' 2" wide (Models 8400 and 8500).

Glazing
Sections can be glazed with 1/8" glass or acrylic (Model 8100), 1/4" glass (Model 8400), or 1/2" insulated glass (Model 8500). Many glazing options are available including tempered glass, tinted glass, low E glass, or laminated safety glass. 0.062" anodized aluminum panels can be used in any section.

Track
Galvanized track system is 2" or 3" depending on door size and weight and can be bracket or angle mounted as required. Optional track configurations include high lift, vertical lift, low headroom, and follow the roof pitch.

Hardware
Hinges and brackets are made from galvanized steel. Rollers have (10) 1/4" steel ball bearings in case hardened races.

Spring Counterbalance
Springs are oil tempered helical wound and stress relieved torsion springs mounted on a cross header shaft supported by bearing brackets. Springs are calculated for 10,000 door cycles. 25K, 50K, or 100K cycles are optional. Cables are galvanized aircraft quality with a minimum 7 to 1 safety factor.

Finish
All aluminum parts are clear anodized, bronze powder coated or white powder coated. Powder coated in custom colors available.

Weatherstrip
Bottom rail has a replaceable U type bottom astragal. Optional weather-stripping is available for header and jambs.

Lock
Lock is interior mounted slide lock.

Operation
Operation to be manual push up, chain hoist, or electric motor.

Wind Load
Consult factory for available wind load rated options.

Size Options

 

Section Heights Available

21" , 24"

Door Widths

Door Widths

Panels Wide

Up to 9"2"

http://doorlinkmfg.com/images/product/panel.gif  http://doorlinkmfg.com/images/product/panel.gif 

9"3" to 12'2" http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif
12'3" to 17'2" http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif 

17'3" to 18'2"

http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif

18'3" to 20"2" http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif http://doorlinkmfg.com/images/product/panel.gif